Joined in 2023 
82 
63 About this deal
The interface is similar to another item I own where you press enter to start adjusting the temp and then the arrow to change the number, so for me it made immediate sense on what buttons to push. For anyone that intuitively thinks they should press the arrow to change the temp, I would highly recommend writing on the unit itself so you know what to do. Even a simple 1 and 2 to know which to press first would do it for you. This Hakko iron’s temperature range is 392°-896°F. However, the manufacturer recommends using this unit only for general electronics projects.
The short answer is yes, flux is necessary for soldering. Flux helps to remove oxidation from metal surfaces and aids in the flow of solder and the overall soldering process. Without flux, soldering could result in weak or unreliable joints. What solder is best for electronics?An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to HAKKO FX888D. Hakko’s stand is sturdier and boasts a secure holder for the iron, meaning it won’t tip over if accidentally bumped. It also offers two ways to clean the tip – brass wire for dry cleaning and a sponge for wet cleaning. Plus, its easy-to-remove top lets you clear out excess solder from the cleaning stations without any trouble. The Hakko FX888D has an increased heater output of 30% compared to the Hakko 936 & 937 models. It also offers outstanding thermal recovery by using T18 tips, allowing soldering to be done at a lower temperature and in-turn reduces the thermal impact of components and extends tip life. Additionally, both the Hakko FX-888D and the Weller WE1010 have temperature control dials that allowed me to adjust the heat for different soldering tasks. This was particularly helpful for delicate projects where too much heat could potentially damage the materials being worked on. Both stations also have a digital display that showed the current temperature, as well as a convenient standby mode to conserve energy when not in use. Differences Between Hakko FX-888D and Weller WE1010 Performance
Not only does the Hakko reach optimum temperature 30% faster than other brands, but in testing, it also showed less of a temperature drop after soldering or cleaning the tip. Additionally, Hakko had a faster recovery time than its competitors. Although Weller’s performance is good, Hakko simply outperforms it in every way [4]. Controls and Ease of Use This is a genuine 240V Hakko Soldering Station with Australian plug. This soldering station comes with a FREE pair Piergiacomi Flush Side Cutters - 138mm . This particular soldering iron can be used for stained glass. Just keep in mind that you should start soldering at the decreased temp range. Slowly increase the temperature range until you get the expected result. Secondly, the cool-off period is much longer than other models on the market, which means you’ll have to replace the tip more frequently; When it comes to soldering, the Hakko FX-888D and Weller WE1010 are both top contenders in the industry. But which one is better for your needs?This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. The Hakko and Weller are both rated at 70W. However, the temperature range of the Hakko is much wider. Most people won’t use the Weller near the low or high ends of its range let alone the expanded high and low temps of the Hakko.
Great Deal 
New Comment